EndoGator™ Accessories

These steps are to be used in conjunction with the current pump irrigation devices for Endoscopy.  If there is a specific question or concern, please refer to the device manual or contact Byrne Medical, Inc. Customer Service for assistance.

#100105 –EndoGator™ Extension tubing

Disposable tubing that is used to lengthen EndoGator tubing.

#100110 –EndoGator™ Cartridge

A replacement cartridge for all cartridge-based pumps

#100115 – EndoGator™ Auxiliary Water Jet Tubing for Olympus ® 160/180 series scopes

A replacement for the reusable Olympus Water Jet Tubing.  Our product comes sterile and ready to use.  Simply attach the connector to the Olympus 160 or 180 series scope.

#100116 - EndoGator™ Water Jet Connector for Pentax ® scopes

A replacement for the reusable Pentax Water Jet Tubing.  Our product comes sterile and ready to use.  Simply attach the connector to the Pentax Water Jet port of the appropriate scope.

#100126 - Back-Flow Valve

Single-use item.   The backflow valve is used to eliminate the risk of cross contamination.  If the device is lost or compromised, the backflow valve should be replaced.  Open the sterile peel-pack.  Attach the backflow valve via the luer lock connector.  Discard as required. 

#100135 - Irrigation Channel Tubing

Single-use item.    A different method for irrigation by using the channel tubing to pin-point fluid to a precise location.     

Open the sterile peel-pack and attach the channel tubing to our Endo Gator backflow valve connector.  The channel tubing feeds into the endoscope biopsy port and delivers fluid to the specific area for irrigation.  After the procedure, the channel tubing is immediately discarded.